 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| spec no : www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 1 of 12 ? ? s s p p e e c c i i f f i i c c a a t t i i o o n n customer product ? saw filter model no ? hd f4522 prepared ? checked ? houshihong approved ? charles d a t e ? 2007-01-25 ?? customer received: checked ? approved date ??? shoulder electronics limited
saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 2 of 12 ?? ?? ??? ? saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 3 of 12 1.features _ rf bandpass filter for cdma450 c-band tx. part _ usable bandwidth 5mhz (450 mhz ~ 455 mhz) _ high attenuation _ no matching single-ended operation _ ceramic surface mounted device package ( 3.0 mm 3.0mm ) _rohs compliant 2. electrical specification parameter rating unit operating temperature range -30~85 c storage temperature range -40~85 c power handling capability 30 dbm electronic characteristics 2-1.typical frequency response saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 4 of 12 2-2 input / output vswr charts saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 5 of 12 2-3input / output smith charts saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 6 of 12 2-4.electrical characteristics minimum typical maximum center frequency ( f0 ) mhz - 452.5 - insertion loss (f0 +/- 2.5 mhz) db - 2.0 2.5 amplitude ripple (f0 +/- 2.5 mhz) db - 0.8 1.2 vswr (f0 +/- 2.5 mhz) - 1.5 2.0 relative attenuation 0.3 mhz ~ 347.5 mhz 347.5 mhz ~ 441.5 mhz 460.0 mhz ~ 465.0 mhz 465.0 mhz ~ 1700 mhz 1700 mh 2000 mh db 30 25 38 27 2 0 35 30 45 32 25 - input/output impedance ? - 50 - 3. test circuit saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 7 of 12 4-1. dimension 4-2marking configuration 1) pad number 1 index 2) manufacturer name 3) marking number saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 8 of 12 5.environmental perfor mance characteristics item condition specifications high temperature the specimen shall be store at a temperature of 852 for 96 for 96 for 96 =>-40 =>+85 =>+25 , 220 , 40s saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 9 of 12 the specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. the specimen shall be stored at standard atmospheric conditions for 1h, after which the measurement shall be made. test board shall be 1.6 mm thick. base material shall be glass fabric base epoxy resin. solder ability immerse the pins melt solder at 260 6.mechanical test items conditions specifications vibration 600-3300rpm amplitude 1.5mm 3 directions 2 h each drop on maple plate from 1m high 3 times lead pull pull with 1kg force for 30 seconds lead bend 90 o bending with 500g weigh 2 times there shall be no damage. 7. remark 7.1 static voltage static voltage between signal load & ground may cause deterioration &destruction of the component. please avoid static voltage. 7.2 ultrasonic cleaning ultrasonic vibration may cause deterior ation & destruction of the component. please avoid ultrasonic cleaning 7.3 soldering only leads of component may be solder ed. please avoid soldering another part of component. saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 10 of 12 8. packing 8.1 dimensions (1) carrier tape: figure 1 (2) reel: figure 2 (3) the product shall be packed properly not to be damaged during trans portation and storage. 8.2 reeling quantity 1000 pcs/reel 7?? 3000 pcs/reel 13?? 8.3 taping structure (1) the tape shall be wound around th e reel in the direction shown below. (2) label device name user product name quantity lot no. (3) leader part and vaca nt position specifications. saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 11 of 12 9. tape specifications 9.1 tensile strength of ca rrier tape: 4.4n/mm width 9.2 top cover tape adhesion (see the below figure) (1) pull off angle: 0~15 o saw filter hd f4522 www.shoulder.cn tel:0755-82916880 fax:0755-82916881 e-mail:info@shoulder.cn page 12 of 12 [figure 2] [unit:mm] a b c d e w t r ? ? 0.5 ? 0.5 ? 0.8 0.5 0.3 |
Price & Availability of HDF4522
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |